Search
Browse Categories
Products

Replacement Spinalator Rollers - BACKORDERED 4-8 WEEKS!

Price: $219.99
Out of stock
Item Number: SRR

Personalization

* denotes required field

Update Kit *


Replacement Spinalator Roller - Spinalator Rollers


New Rollers are Black, Higher Density Foam! They Include New Style steel one piece bearing & bolts for easy install.

Back INSTOCK!!! Please be patient as we fill the BO List orders first...Thanks


Spinalator Rollers Set of three comes with Steel bearings, bolts, & lock washers. These replacement Spinalator rollers will fit all spinalators with electric elevation.

If you have an old style table with the manual wheel elevation (shown below) and roller mounting system, you will need the update kit.

The picture below shows an oldest style Spinalator with Manual Roller elevation.It uses a very OLD  3 arm, mounting system.You MUST purchase the oldstyle UPDATE KIT!!!  If you are unsure, please call Keith @ 800-463-1381.

  

If you are not sure contact our Service manager at  800 463 1381  ask for Keith
 
 
Replacement Spinalator Rollers Instructions
 
  1. Remove top from spinalator by unclamping end brackets.
  2. Make sure hands are clear of any moving parts and turn table timer on. Elevate Roller to top height
  3. Turn Roller rotation switch OFF, with one roller centered to the top of the triangle assembly.
  4. UNPLUG TABLE - Some spinalators have a auto retract to lower rollers. Failure to UNPLUG table will let the roller retract automatically. This could cause bodily injury or tear up your new spinalator rollers! This will also keep you from getting shocked if you happen to touch a exposed wire.
  5. Remove Bolt from Roller and remove old spinalator Roller. Install new Spinalator roller, New style roller will have a easy one piece bearing and dual bolt for ends. Make sure and use provided Lock Washer!!!
  6. Ensure Hands, tools, and anything else is clear of rollers then plug up table. Turn spinalator rotation switch on and cycle roller to next top height and shut off rotation switch again.
  7. UNPLUG TABLE - Some spinalators have a auto retract to lower rollers. Failure to UNPLUG table will let the roller retract automatically. This could cause bodily injury or tear up your new spinalator rollers! This will also keep you from getting shocked if you happen to touch a exposed wire.
  8. Ensure Hands, tools, and anything else is clear of rollers then plug up table. Turn spinalator rotation switch on and cycle roller to next top height and shut off rotation switch again.
  9. Final Roller - Remove Bolt from Roller and remove old spinalator Roller. Install new Spinalator roller, New style roller will have a easy one piece bearing and dual bolt for ends. Make sure and use provided Lock Washer!!!
  Check Chain Tension on Spinalator Roller rotation motor chain while top is removed. The Spinalator Roller tension should be like a bicycle chain; tight but not over tightened, to stretch the chain! Lube Chain with a Teflon lube. WD 40 will stop a squeak but is water based and will evaporate quickly! If you have movement in the roller after tightening chain, check spinalator sprocket for a broken weld....

For Assistance call Jay 256 245 8390

Spinalator Rollers,Replacement Spinalator Rollers,Spinalator Roller,Replacement Spinalator Roller,spinalator roller,spinalator roller table part,spinalator table roller,Spinalator Rollers,Replacement Spinalator Rollers,Spinalator ist Roller,Replacement Spinalator table  Roller ,spinalator table roller,spinalator roller table part,spinalator table rollers

Product Reviews

(8 Ratings, 1 Review) Average Rating:
ratingratingratingratingrating
ratingratingratingratingrating
Sobre los rodillos
Victor (Ecuador) 11/1/2012 11:16 AM
Mis estimados amigos quiero saber si ustedes me pueden enviar los rodillos acá al Ecuador y cuanto sería el costo. Atentamente Víctor
Search Shopping Lists
Shopping Cart
Your cart is empty.
 New Chiropractic Tables
and Chiropractic Supply Items
 
Used Chiropractic Tables
 
Decompression Tables